Kitchen Cabinets in Canton, GA: Installed by Our Crew, 10x10 from $1,500

The finished kitchens closest to Canton are in Milton, 13 miles away, and Alpharetta, 16 miles away. We haven't posted a Canton kitchen yet, so these are the nearest.

Milton, 13 miles from Canton

The homeowners came to our Alpharetta showroom with one firm wish: a white kitchen that doesn't look like every other white kitchen. We kept the perimeter in white shaker and broke the wall of doors with two glass-front uppers next to the range. The warmth comes from a brown-veined stone countertop and the wood trim on the hood. See the Milton kitchen.

Alpharetta, 16 miles from Canton

A small L-shaped kitchen in a 1990s subdivision house, with a compact island that still leaves a walkway on both sides. Light gray shaker on the perimeter, the island in the same gray, white quartz, brass pulls and a plain subway backsplash. See the Alpharetta kitchen.

Sandeep wrote: "Usa cabinet store have nice collection of cabinet and counter tops at reasonable prices. Please visit and check. Awesome customer service" Caymen wrote: "The cabinet store has the best prices for all your cabinet and countertop needs. The staff was super friendly and also help me with a visual of my kitchen. This place is a definite to bust if you are in need of cabinetry." More on our reviews page and in the projects gallery.

Cabinets for a 10x10 kitchen run from $1,842 to $9,384 across our RTA, stock and pre-assembled lines, and Canton delivery starts at $300.

Those are cabinets only. Assembly, installation, delivery and countertops come extra, and RTA and stock assembly is $38 per base, wall or vanity cabinet. Semi-custom and custom cabinets start from about $150 per cabinet, quoted per project.

• Delivery to Canton: curbside $300 or driveway or garage $450, because Canton is 20 miles out and inside the 50-mile bracket.
• Installation: $130 per cabinet box ($90 ready-assembled), $260 for pantry or double cabinets, a $200 trip charge for Canton (a drive of about an hour or less), and $200 per project for pulls and knobs hardware.
• Countertops installed: granite from $47 per sq ft and quartz from $49, with template, fabrication and installation included.

A typical 10x10 comes to about $1,920 to $2,480 in installed labor, before demolition at $1,600 per project, countertops, plumbing and electrical. A plywood box runs 10 to 15 percent above an MDF box in our kitchens, and we recommend plywood anyway. Your exact figure comes from your free 3D design. For context, HomeAdvisor puts national cabinet costs for a 10x10 kitchen at $2,000 to $24,000. See the full price list and our kitchen remodel cost guide for a whole kitchen renovation.

Our crew installs a standard 10x10 kitchen in 3 to 5 working days on average, once design, sign-off and delivery are done.

1. Free 3D design. Kitchen design starts with photos from all sides, the ceiling height, wall lengths, your layout and storage needs, and where the windows, plumbing, fridge and gas range sit. Open the 3D on your phone, ask for any change by one message, and the design stays valid for 10 days.
2. We measure in your home. We drive out to Canton and measure the room ourselves.
3. Sign-off and payment. You confirm the full design with every dimension, then a payment link arrives with all dimensions and specs. Re-check, sign, pay, and the order goes into production. Cabinets are made per project, so there is no cancellation, return or exchange after that.
4. Production and delivery. Production time depends on the design and is quoted per project. Delivery usually lands about 10 days after shipment, and we warn you in advance of any change.
5. Installation. Our crew sets a standard 10x10 in 3 to 5 working days, quoted per project.

The countertop is templated after the cabinets are in. More on countertop installation.

Canton sits in Cherokee County, ZIP 30114, 30115 and 30169, and from here we also install in Holly Springs (about 5 miles), Woodstock (about 9), Ball Ground (about 10), Milton (about 13) and Alpharetta (about 16). Our kitchen and bathroom work follows the same route: bathroom remodeling, bathroom vanities and custom cabinetry. Visit the showroom, or call (470) 460-6180 to book a design consultation.

Start your free design with your Canton ZIP, photos of the room from all sides, the ceiling height and wall lengths. Tell us the style and budget behind the dream kitchen in your head, and we'll draw it in 3D, then change anything with one message. Your estimate comes from your free 3D design. Call (470) 460-6180 or send your photos.