Shaker Kitchen Cabinets: The Door That Fits Every Kitchen

Shaker cabinets have a five-piece door with a recessed center panel, framed by square-edged stiles and rails. The style comes from Shaker furniture and fits traditional, farmhouse, transitional and modern kitchens. We carry shaker in RTA, pre-assembled, stock and semi-custom lines, painted or stained.

That's the whole idea. A flat panel sits in a recess, the frame stays plain, and the door shows clean lines with almost no ornamentation. Our catalog holds 141 shaker and slim shaker variants, so you can see the door in your own color before you commit.

Our catalog lists 141 shaker and slim shaker variants, led by natural wood at 36, then white and gray at 26 each.

White shaker is the popular choice for painted shaker cabinets, the classic white that fits almost any white shaker kitchen. Painted doors use solid wood or HDF stiles and rails around a ⅜ to ⅝ inch MDF center panel, which holds paint flat. Stained shaker doors use solid wood stiles and rails with a plywood or MDF center panel.

Slim white shaker comes in select white finishes.

Slim shaker stiles and rails measure 0.60 inch on our doors, and 19 of our 141 shaker-family variants use them.

Among shaker-style cabinets, the frame is the only thing that changes, so shaker vs slim shaker comes down to how much frame you want to see. Classic rails read traditional or craftsman, and slim rails read transitional and minimalist. A 5-piece door is four frame parts and one panel. Both are overlay doors on our framed lines, and 140 of the 141 variants are framed. Only one uses frameless construction.

Door styles that look alike from across the room behave differently up close. Shaker cabinet doors and raised panel doors are both panel doors, but the flat center keeps shaker easy to wipe. Inset costs more because every door is fitted inside its opening with a tight gap. A homeowner who wants shaker without that premium can pick overlay, and the style of cabinet you pick here sets the cabinet door for the whole kitchen. Choose the cabinet style first, then the color.

Our shaker lines start with wall cabinets from $43 and base cabinets from $87, and a 10x10 kitchen runs from $1,842 to $9,384 for cabinets alone.

Shaker splits into 54 stock, 42 pre-assembled, 33 RTA and 12 semi-custom variants in our catalog, 141 in all.

Our own figures are below, and each line links to its page. Prices are cabinets only; assembly, installation and delivery extra. Production lead time is quoted per project on every line. We deliver anywhere in Georgia and install within 100 miles of Alpharetta. For context, Angi puts stock at $100 to $300 per linear foot, semi-custom at $200 to $650 and custom at $500 to $1,200.

Shaker cabinetry from RTA to semi-custom shares one door look, and the lines differ in what sits behind it. An RTA cabinet is ready-to-assemble, so it is built after delivery rather than in the factory.

How much do white shaker cabinets cost?

Wall cabinets start from $43 and base cabinets from $87, so a white shaker price comes down to line, size and finish.

• Painted shaker: solid wood or HDF stiles and rails around a ⅜ to ⅝ inch MDF center panel. The panel moves less with humidity, so paint seams stay closed, and for composite panels, ask for the TSCA Title VI label, required on composite wood sold in the US since 2019.
• Stained shaker: solid wood stiles and rails with a plywood or MDF center panel.

Open the door and look at the box. That's where the money is. We use a ½ inch plywood box on our main lines, ¾ inch plywood adjustable shelves and ⅝ inch solid wood dovetail drawer boxes. In our projects a plywood box usually comes out 10 to 15% more than the same kitchen with an MDF box, and we recommend plywood anyway: on kitchens we've installed and serviced, MDF boxes swell at the sink base and under the dishwasher. The hinges and drawer glides are what fail first in the cheap cabinets we replace, because they work every day. Quality craftsmanship shows in that box, not only in the door, and anyone can put a high-quality door on a weak box. More on the plywood vs MDF page.

Our founder puts it this way: "If you want a kitchen that lasts for years, do not buy cabinets with MDF boxes." MDF is pressed wood fiber with binders. It looks fine new, but water under the sink or at a damaged edge makes it swell and break down, and it cannot be restored. This is about the box only, and the saving is a few hundred dollars on a kitchen that costs thousands.

Big stores pick the price, and people pay it out of habit. One customer showed us a Home Depot quote of $33,000 to $34,000 for cabinets only for that customer's kitchen. Our painted cabinets came to $7,800.

The IRC requires 30 inches above a cooktop to unprotected combustibles, which fixes where the wall cabinet over the range can start, and shaker pairs with white quartz, brass or nickel pulls and a two-tone island.

That clearance drops to 24 inches with listed protection or per the appliance instructions, so read the range manual before you fix the wall cabinet height.

Countertops

White quartz keeps a white kitchen bright. Black granite gives hard contrast against gray or green doors, and butcher block warms blue and black. Marble and other countertops work too. Installed within 100 miles of Alpharetta, entry white quartz is from $49 per sq ft and most quartz runs from $53 to $60, with template, fabrication and install included.

Hardware

Brass warms navy and green, matte black sharpens white and gray, and brushed nickel stays quiet on everything. Cabinet hardware follows the door: knobs suit doors and pulls suit drawers. See the hardware page.

Layouts

About 8 of 10 of our kitchens include an island. A two-tone island, dark base cabinets under light wall cabinets, or glass-front uppers each break up a wall of one color. A corner base cabinet takes a lazy susan so the dead corner stays usable. Some homeowners pair shaker doors with slab drawer fronts on the base cabinets for a flatter look. A shaker style kitchen leans on color and hardware for personality. Because the door is plain, the décor does the talking, and a chic island color is an easy swap.

Shaker cabinet crown molding closes the gap between wall cabinets and the ceiling, and a light rail hides under-cabinet lighting, which NKBA's 2026 survey lists at 82% (634 respondents). Tell us your ceiling height and the design shows the molding.

NKBA's 2026 Kitchen Trends survey (634 respondents, September 2025) leans toward slab (69%), but shaker and slim shaker are still 141 of our 205 variants.

Shaker looks to be changing shape rather than fading. Slimmer rails suit the minimalist look that NKBA puts at 60%, and white oak is the top wood at 51%. In our own kitchens over the last year, white oak was the most common finish, about 7 of 10. Warm colors such as Clary Sage and natural oak give a softer kitchen style than stark white, though classic white still works with brass or nickel pulls. Our color guide shows the full range.

Prime Cabinet Store has 20 years and 1000+ projects behind us, and finished kitchens are on our projects page.

• Shaker kitchen in white in Milton: kitchen cabinets and countertops
• White and dark island shaker kitchen in Johns Creek: kitchen cabinets and countertops
• Light gray shaker kitchen in Alpharetta: kitchen cabinets and countertops

Our free 3D design stays valid for 10 days, and we start from photos of your kitchen from all sides plus the ceiling height.

1. Design: send photos, ceiling height, wall lengths, and where the windows, plumbing, fridge and range or gas line sit. Within 100 miles of Alpharetta we measure the kitchen ourselves; outside that zone you measure, and we recommend a professional check. You open the 3D on your phone and change anything with one message while the design is open (10 days), and sign-off usually takes at most one revision round.
2. Confirm: you review the full design with every dimension, check every dimension before you pay, and confirm it.
3. Pay and sign: you get a payment link with the full spec, re-check it and sign. Production starts after that. Cabinets are made per project, and there is no cancellation, return or exchange after payment.
4. Deliver and install: a standard 10x10 kitchen usually takes our crew 3 to 5 working days, quoted per project and never a guarantee. Delivery usually comes within about 10 days of shipment, with advance notice of any change. Production lead time is quoted per project, and optional paid delivery insurance is quoted with the order.

We deliver anywhere in Georgia and ship across the US on request. Curbside delivery is $300 and driveway or garage delivery is $450, both up to 50 miles; beyond that we quote per order. Our crew installs within 100 miles of Alpharetta, with installation from $130 per cabinet, and inside that zone you may also take delivery only and install yourself. Elsewhere we help you find an installer. Every customer gets a dedicated personal manager. See Georgia cabinet delivery and installation.

Prime Cabinet Store, 4700 Atlanta Hwy, Alpharetta, GA 30004, (470) 460-6180. Showroom open Mon to Sun. Monday to Sunday, 9 AM to 6 PM

While your free 3D design is open for 10 days, one message changes anything in it.

Send us photos from all sides and the ceiling height, and we build your dream kitchen in 3D. Our free kitchen design costs nothing and carries no kitchen designer fee, and cabinets take 30 to 40% of a typical kitchen remodel budget (Angi), so check the numbers early. Planning a full kitchen remodel? See kitchen remodeling, start on the design page or message us.