White Oak Kitchen Cabinets: The Wood in 7 of 10 Kitchens We Build

White oak has a neutral golden-beige tone and an open, straight grain, with none of the yellow or pink undertones of red oak. It's a dense, stable wood, and that's why kitchen builders keep reaching for it.

In our catalog white oak comes as Slim White Oak (slim shaker, stock) and Inset White Oak (inset, semi-custom); about 7 of 10 of our kitchens last year used white oak, most of them made per project.

Our catalog lists 2 white oak variants: Slim White Oak on the stock line and Inset White Oak on the line above it.

Slim shaker is the white oak door most people picture. The stiles and rails are 0.60 inches wide, so the frame stays thin and the grain does the talking. An inset door sits flush inside the frame. The fit is tighter, so expect it to cost more than an overlay door.

Construction depends on the line, not the wood. Our main lines use a ½ inch plywood box, and our stained lines use solid wood stiles and rails with a plywood or MDF center panel.

Slab, classic shaker and glass-front white oak are not in the catalog today. Browse the door styles on the pages for slim shaker, inset, slab, shaker and glass-front.

White oak is sawn three ways, rift, quartersawn and plain, and each cut shows a different grain.

Looks run from natural clear matte and a light honey stain to cerused, which is white-limed grain, and fumed, which goes dark. The natural-wood family in our catalog carries finishes named Natural Wood, Cotton Oak, Hazelnut Oak and Vintage Wood, among others. See the natural wood color range.

Our entry prices are $43 for a wall cabinet and $87 for a base cabinet on the RTA and stock lines, cabinets only.

Those ranges cover the whole line, not white oak alone. A 10x10 kitchen is about 10 cabinets, so roughly $150 each, and we don't quote the upper lines per linear foot. Our custom cabinets and custom cabinetry share one basis: cabinets only, with assembly, installation, delivery and countertops extra. Our crew installs within 100 miles of Alpharetta, about $1,920 to $2,480 labor only for a typical 10x10. Georgia delivery starts at $300 curbside up to 50 miles.

For context, HomeAdvisor lists a 10x10 kitchen nationally at $2,000 to $24,000, with most between $4,000 and $13,000.

Is white oak cabinetry expensive?

It depends on the line: from $1,842 for a stock 10x10, from $1,500 on the upper lines. To save money, start from the stock line and put the difference into the countertop.

Sparkling White and White Linen quartz start at $49 per square foot installed, and a white top is the easy partner for white oak.

Worried about too much wood? One contrast is enough. Check a sample at home, because natural wood tones shift with your light.

White oak is golden-beige and neutral, walnut is dark brown, red oak leans pink, and maple is pale with a tight grain.

Color is the quick tell between red oak and white oak.

Yes: white oak was in about 7 of 10 of our kitchens last year. For context, NKBA's 2026 Kitchen Trends survey of 634 respondents ranks white oak the top wood at 51% and slab doors at 69%.

That's popularity, not a guarantee. A plain white oak room with no contrast can look flat. So give it a partner: a painted upper or a white or stone countertop, and a matte finish. More on trends is on our blog.

Three jobs in our project gallery today are white or gray shaker, and none of them is white oak. They show how we handle layout and countertops, and that carries over to a white oak room.

Milton: white shaker kitchen with a quartzite island

The homeowners wanted a white kitchen that doesn't look like every other white kitchen. We broke the wall of doors with two glass-front uppers next to the range, and the island uses the same white door, so the warmth comes from the countertop and the wood trim on the hood.

Johns Creek: white kitchen with a dark island

The cooktop and hood moved to the island, so the perimeter stays quiet in white shaker. We checked the cooktop-to-hood clearance and the gas line location before the 3D was signed.

Alpharetta: light gray kitchen with white quartz

A small L-shaped kitchen with a compact island. Light gray shaker keeps the room from going flat white, and the budget went into the box and the countertop.

Until we post some, a door sample is the best way to see the tone, because white oak shifts with the light in your room.

Our crew installs within 100 miles of Alpharetta. We deliver anywhere in Georgia, from the showroom outward.

1. Send photos of the kitchen from all sides, plus the ceiling height, the wall lengths, and where the windows, plumbing, fridge and gas sit. The free 3D design stays valid for 10 days.
2. We send the design with all dimensions and you confirm every one. Inside 100 miles we measure the kitchen ourselves.
3. You get a payment link with the full spec. Re-check it and sign. Only then does production start. Cabinets are made per project, so there's no cancellation, return or exchange after payment.
4. Delivery usually lands about 10 days after shipment. We warn you early about any change, and production time is quoted per project. A standard 10x10 install takes our crew 3 to 5 working days on average, and it is the last step.

Every customer gets a personal manager. Outside the install zone, we help you find someone to assemble and install. Details are on Georgia cabinet delivery.

We also handle kitchen and bathroom work, from kitchen remodeling to bathroom remodeling and bathroom vanities. Prime Cabinet Store is at 4700 Atlanta Hwy, Alpharetta, GA 30004, phone (470) 460-6180, open Mon–Sun, hours Monday to Sunday, 9 AM to 6 PM. Google rating: 4.8 from 103 reviews.

The design is free, and we need very little to start: photos from all sides and the ceiling height.

Tell us your layout size or budget and our designers will draw your dream kitchen in 3D designs, in any finish in our catalog. Change anything with one message. Planning a kitchen renovation or a full kitchen remodel? We handle cabinets and countertops together, and we'll ask what storage you need. A showroom visit is the quickest way to see door styles side by side, and you can ask for a design consultation there. Use the free design request, or call (470) 460-6180.